However, you may have to go into "view wireless networks", and then choose "change order of preferred networks" in left corner of screen.
I cannot get WPA2 enterprise to work on my network. Windows Domain, using IAS and its own CA Linksys WAP200 Access Point I setup the AP to use WPA2-Enterprise Mixed using RADIUS I setup and registered IAS on the domain controller.
I added the AP as a client with and have tried using both RADIUS Standard and Cisco as the RADIUS type.
I configured the IAS policy to grant access to Domain Computers, Authentication is set to PEAP and uses a private cert issued by our CA, the other profile settings are all default.
Click on Properties once you select the wireless network that is having problems.
Click on the Authentication tab and now uncheck the Enable IEEE 802.1x authentication for this network box.
Uncheck "The key is provided for me automatically" and enter and confirm your Network key.
I then tried installing the supplied Sitecom N adapter, after some problems the network appears but I can't connect, I am told "Windows was unable to find a certificate to log you onto the network" I read several threads that led me to uncheck "Enable IEEE 802.1x authentication for this network" and I actually managed to enter the WPA2 code but this just leads to the message "This connection has limited or no connectivity" and "validating identity". If your network is Encrypted go on to step 6 otherwise Click ok and try to connect to your network again.In this window make sure you are in the "Association" tab.Then go to "authentification" tab and untick the box saying "Enable IEEE802.1x to the availiable network" and that should solve your problem Graham UKRight, Graham's solution worked for me.I had been able to connect previously, but the connection would always indicate that it was validating.